Lanier Copier System Edition - Turning on the Power; Turning on the Main Power; Basic Copying

11
1. Basic Copying
Turning On the Power
To turn the machine on, press the op-
eration switch.
Note
❒ This machine automatically enters
Energy Saver mode or turns itself
off if you do not use the machine
for a while. ⇒ “Panel Off Timer”,
“Auto Off Timer”, Administrator
Reference 2 Copier System Edition
-
--
-Power switches
This machine has two power switch-
es. ⇒ p.5 “Guide To Components”,
p.6 “Control Panel”
❖
❖❖
❖ Operation Switch (right side of the
control panel)
Press this switch to activate the
machine. When the machine has
warmed up, you can make copies.
❖
❖❖
❖ Main Power Switch (left front side of
the machine)
Important
❒ The documents stored in the fax
memory will be deleted if the main
power switch is turned off for
more than one hour. ⇒ "Power
Failure Report", Facsimile Refer-
ence Advanced Features manual
Turning On the Main Power
A
AA
A
Make sure that the power cord is
firmly plugged into the wall out-
let.
B
BB
B
Open the switch cover, and then
turn on the main power switch.
The main power indicator lights.
Important
❒ Do not turn the main power
switch off right after turning it
on. This might damage the hard
disk or the memory.
Note
❒ During the warm-up period
(less than 119 seconds), you can
use the Auto Start function.