Lanier Copier System Edition - Page 95

Operating Instructions Maintenance Guide 2 Copier System Edition
24
Types of Paper and Other Media
❖
❖❖
❖ Plain Paper
• Tray 1/2 can hold up to 500 sheets.
PAPER FEED UNIT Type 3800C (500x1) can hold up to 500 sheets.
PAPER FEED UNIT Type 3800C (500x2) can hold up to 1000 sheets.
Paper Bank PS470 can hold up to 2000 sheets.
Confirm that the top of the stack is not higher than the limit mark inside the tray.
• Bypass Tray supports sizes approximately 3.5 - 12 inch in width and approximately 5.8 - 18 inch
in length.
• When printing on the reverse side of plain paper that is already printed on, you should load it on
the Bypass Tray and select [Plain (Duplex Backside)] from [Paper Type:] with the printer driver.
❖
❖❖
❖ Thick Paper
• Use the Bypass Tray.
• The Bypass Tray can hold paper up to 135 kg (163 g/m
2
) in weight. The print quality on paper
that is thicker cannot be guaranteed.
• Confirm that the top of the stack is not higher than the limit mark inside the tray.
• When printing on thick paper, select thick paper mode with the printer driver.
• When printing on the reverse side of plain paper that is already printed on, you should load it on
the Bypass Tray and select [Thick (Duplex Backside)] from [Paper Type:] with the printer driver.
Note
❒ The number of sheets that can be set varies depending on the paper thickness and paper
type.