Operating Instructions Administrator Reference 2
121
❖
❖❖
❖ Recall Interval Time
Specifies the interval the machine waits before resending data or a document, if it could not be sent
to ScanRouter V2 Professional.
Note
❒ Default: 300 Seconds
❒ Enter an interval within the range of “60 -999 seconds” (in one second intervals) with the number
keys.
❒ Press [Clear] if you enter the wrong number.
❖
❖❖
❖ Number of Recalls
When sending documents or data stored in this machine to ScanRouter V2 Professional again, you
can set the maximum number of times you can send.
Note
❒ Default: No
❒ Enter the number of times within the range of “1 to 99” with the number keys.
❒ Press [Clear] if you enter the wrong number.
❒ This setting is for the Scanner function. The distribution of received fax documents will still be
performed.
To Next Page
Loading...
