Operating Instructions Administrator Reference 2
120
❖
❖❖
❖ Fax RX File Transmission
• Setting per Line
Specifies whether or not received fax documents should be sent to ScanRouter V2 Professional
for each of the fax lines.
Note
❒ Default: G3 Port 1/Do not Deliver, G3 Port 2/Do not Deliver, G3 Port 3/Do not Deliver
• Print at Delivery
Specifies whether or not received fax documents that are sent to ScanRouter V2 Professional
should also be printed by the machine at the same time.
Note
❒ Default: No
• File to Deliver
Specifies whether all received fax documents or only received fax documents that include deliv-
ery codes (documents with an ID and F code) should be sent to ScanRouter V2 Professional.
Note
❒ Default: File with Dlvry Code
• Delivery Failure File (Dlvry Failure File)
If a received fax document cannot be sent to ScanRouter V2 Professional, the document is stored
in the machine's memory. To print this stored data, select “Print File”; to delete the data, select
“Delete File”.
Note
❒ If the machine can send data to ScanRouter V2 Professional, data is sent automatically.
❒ If you delete the data, you will not be able to distribute or print the data.
To Next Page
Loading...
