Operating Instructions Administrator Reference 2
123
❖
❖❖
❖ Key Operator Code
Important
❒ The administrator must properly manage the key operator codes set for the machine.
This specifies whether or not to use passwords (max. 8 digits) to control use of the “Timer Setting”
or “Key Operator Tools” settings for the access codes.
Note
❒ Default: OFF
❒ If you select “ON”, enter the access code (max. 8 digits) with the number keys, and then select
“Partial” or “All Initial Settings” to set the access limit.
• If you selected “Partial”
A key operator code is only required for the “Timer Setting” and “Key Operator Tools” for
initial settings. “Menu Protect” will be set for “Maintenance” in the Printer Features.
• If you selected “All Initial Settings”
A key operator code will be required to access all the items in the System Settings, Mainte-
nance, Copier/Document Server Features, Facsimile Features, Printer Features, and Scanner
Features.
❒ If you select “All Initial Settings”, you will need to enter the key operator code to access the Key
Operator Code screen.
❖
❖❖
❖ AOF (Always ON)
Activate the Auto Off Timer settings. Normally, you need not change this setting.
Note
❒ Default: ON
To Next Page
