Operating InstructionsFacsimile Reference (option) <Advanced Features>
151
Note
❒ Before you can use this feature, you need to
turn on Authorized Reception (Initial Setup
Reception Mode settings), program the Spec-
ified Senders (Key Operator Settings) along
with the Paper. ⇒ p.198 “Reception Mode”,
⇒ p.223 “Special Senders to Treat Different-
ly”
❒ When you set paper sizes other than A4L,
B4L, A3L (8
1
/
2
"×11"L, 11"×13"L) in the
bypass tray, specify the paper size. This size
should match the bypass paper size for copy-
ing or a paper jam may occur. To change the
bypass paper size for copying. ⇒ “Loading
Paper in the Bypass Tray” in Maintenance
Guide 2 Copier System Edition
❒ If the specified paper size and the size of pa-
per set in the bypass tray do not match, paper
jams may occur or the image may be truncat-
ed.
❒ If you use this feature, Image Rotation and
180 Degree Rotating Printing are not possi-
ble.
To Next Page
Loading...
