Lanier Copier System Edition - Page 1238

Operating InstructionsFacsimile Reference (option) <Advanced Features>
310
Transfer Report Before using Transfer Request, you
need this Transfer Report setting.
⇒ p.255 “Transfer Report”
Program Confidential ID Register an ID required for Confiden-
tial communication.
⇒ p.257 “Programming a Confiden-
tial ID”
Program Polling ID Register an ID required for Polling
communication.
⇒ p.259 “Programming a Polling
ID”
Program Memory Lock ID Register an ID required for Memory
Lock reception.
⇒ p.260 “Programming a Memory
Lock ID”
Select Dial/Push Phone Select a line type when you connect
the machine to G3 analog line.
⇒ p.261 “Selecting Dial/Push
Phone”
Program ISDN-G3 Line Program Own Fax Numbers, and
sub-addresses when you connect the
machine to ISDN.
⇒ p.263 “Programming ISDN G3
Line”
Program ISDN-G4 Line Program your Own Fax Number, TID
(Terminal ID) and sub-address when
you connect the machine to a G4 dig-
ital line.
⇒ p.265 “Programming ISDN G4
Line”
Feature name Description Reference