Control Panel
7
1
11. Operation switch
Press this switch to turn the power on
(the On indicator goes on). To turn the
power off, press this switch again (the On
indicator goes off).
Note
❒ The operation switch is ineffective
during a system setting operation.
12. {
{{
{Sample Copy}
}}
} key
Press to make a single set of copies or
prints to check for poor copying or print-
ing before making multiple sets of copies
or prints.
13.
{
{{
{Start}
}}
} key
Press to start copying, scanning, or print-
ing documents stored on the Document
Server.
14. {
{{
{Clear Stop}
}}
} key
• Clear
Press to delete a number entered.
• Stop
Press to stop a job in progress.
15. {
{{
{#}
}}
} key
Press to enter a value.
16. Number keys
Use to enter the desired number of copies
and data for selected modes.
17. Color Selection key
When using the copier, use this key to
switch between {
{{
{Full Color}
}}
}, {
{{
{B&W}
}}
}, {
{{
{Sin-
gle Color}
}}
} or {
{{
{Two Color}
}}
}. ⇒Copy Refer-
ence <Basic Features>
18. Function keys
Press the appropriate key to choose any
of the following functions:
• Copy
• Document Server
• Facsimile
• Printer
• Scanner
⇒ p.12 “Changing Modes”
19. Function Status indicator
These show the status of the above func-
tions:
• Yellow: the function is selected.
• Green: the function is active.
• Red: the function has been interrupt-
ed. Change the panel display with the
appropriate function key, and then
follow the instructions.
To Next Page
Loading...
