Lanier Copier System Edition - Page 262

Operating Instructions Administrator Reference 2
33
G
GG
G
Click [Add..] when the [Select Port] dialog box appear.
H
HH
H
Select [SmartNetMonitor for Client] and then click [OK].
Available printers will be listed.
I
II
I
Select a printer you want to use.
TCP/IP
A Select the printer you want to use, and then click [OK].
Note
❒ Printers that respond to an IP broadcast from the computer will be displayed. To print to a
printer not listed here, click [
Specify Address
] and then type the IP address or host name.
NetBEUI
A Click [NetBEUI].
A list of printers that can be printed by the NetBEUI protocol appears.
B Select the printer you want to use, and then click [OK].
Note
❒ Printers that respond to an broadcast from the computer will be displayed. To print to a printer
not listed here, click [Specify Address] and then type the NetBEUI address. Confirm the Net-
BEUI address on the network configuration page. For more information about the printing of
configuration page, see p.39 “The conditions of the bidirectional transmissions”.
❒ You cannot print to printers beyond routers.