Operating Instructions Administrator Reference 2
102
❖
❖❖
❖ Function Priority
You can specify the mode to be displayed immediately after the operation switch is turned on or
System Reset mode is turned on.
Note
❒ Default: Copier
❖
❖❖
❖ <F/F4> Size Settings
Currently three types of F size are available: 8
1
/
2
"×13", 8
1
/
4
"×13", and 8"×13". The document feeder
or exposure glass sensor cannot distinguish these three types of originals. This function sets the F
size for the document feeder or exposure glass sensor. Auto Paper Select or Auto Reduce/Enlarge
can be used for F size originals based on this setting. You'll find it very convenient to use the ma-
chine with the F size setting.
Note
❒ Default: 8
1
/
2
"×13"
❖
❖❖
❖ Function Reset Timer
The length of time the machine waits before changing modes when using the multi-access function.
This is useful if you make many copies where you have to change the settings for each copy. If you
set a large value, you can prevent jobs from other functions interrupting the copy job.
Note
❒ Default: Set Time
❒ When you select "Set Time", enter the time (3∼180 seconds by 1 second steps) with the number
keys.
❒ The default time setting is 30 seconds.
To Next Page
Loading...
