Lanier Copier System Edition - Page 339

Operating Instructions Administrator Reference 2
110
Paper Size Settings
3
/
3
❖
❖❖
❖ Cover Sheet Tray (for Copy/Document Server function only)
Allows you to specify and display the paper tray to set cover sheets. After selecting the paper tray,
you can also specify the display timing and copy method for two-sided copying.
Note
❒ The functions that use the Cover Sheet Tray setting are the front cover function and both covers
function.
❒ When Mode Selected is selected, the cover settings options are only displayed when the cover
function or slip sheet function is selected.
❒ You can only set the Copying Method in Duplex setting when At Mode selected is selected.
❖
❖❖
❖ Slip Sheet Tray (for Copy/Document Server function only)
Allows you to specify and display the paper tray to set slip sheets. After selecting the paper tray, you
can also specify the display timing and copy method for two-sided copying.
Note
❒ When you use the Slip Sheet function, you can use the output tray specified in the Slip Sheet
Tray setting.
❒ When At Mode selected is selected, the options are only displayed when the cover function or
slip sheet function is selected.
Reference
See "Cover/Slip Sheet" in the Copy Reference <Advanced Features>.