Operating Instructions Administrator Reference 2
118
❖
❖❖
❖ Input Prime
Specifies whether the prime signal is active or inactive when an input prime signal is sent. Under
normal circumstances, you will not need to change this setting.
Note
❒ Default: Invalid
❖
❖❖
❖ Bidirectional Communication
Specifies the printer's response mode and so forth for a status request when using the parallel inter-
face. If you experience problems when using other manufacturers printers, set this to “Off”. How-
ever, if this is set to “Off”, asynchronous functions will not work.
Note
❒ Default: Yes
❖
❖❖
❖ Signal Control
Specifies the error processing settings for when an error occurs when printing from a computer or
sending faxes. Under normal circumstances, you will not need to change this setting.
Note
❒ Default: Job acceptance priority
To Next Page
Loading...
