Operating Instructions Administrator Reference 2
177
Font Source You can set the location of the default font.
• Resident
• RAM
• HDD
Note
❒ Default: Resident
❒ You can select only fonts downloaded to printer RAM or HDD.
RAM or HDD will not appear when no font is downloaded.
Font Number You can set the ID of the default font you want to use.
• 0 to 50
Note
❒ Default: 0
Point Size You can set the point size you want to use for the default font.
4 to 999.75 by 0.25
Note
❒ Default: 12.00
❒ This setting is effective only for a variable-space (proportional) font.
Font Pitch You can set the number of characters per inch you want to use for the default font.
0.44 to 99.99 by 0.01
Note
❒ Default: 10.00
❒ This setting is effective only for a fixed-space (proportional) font.
Menu Description
To Next Page
Loading...
