Operating Instructions Administrator Reference 2
221
No Paper: Tray 2 There is no paper in the optional Pa-
per Feed Unit (Tray2).
Load paper into the bypass tray. See
Maintenance Guide 2.
No Paper: Tray 3 There is no paper in the optional Pa-
per Feed Unit (Tray3).
Load paper into the bypass tray. See
Maintenance Guide 2.
No Paper: Tray 3 (LCT) There is no paper in the optional LCT
(Tray3).
Load paper into the bypass tray. See
Maintenance Guide 2.
No Paper: Tray 4 There is no paper in the optional Pa-
per Feed Unit (Tray4).
Load paper into the bypass tray. See
Maintenance Guide 2.
No Paper: User Selected Tray There is no paper in the selected tray. Load paper into the selected tray. See
Setup Guide.
Not Detected: Duplex Unit The optional Duplex Unit is not set
correctly.
Set the optional Duplex Unit correct-
ly. If the message appears again, call
your sales or service representative.
An error has occurred in the Duplex
Unit.
Not Detected: Fusing Unit The fusing unit is not set correctly. Set the fusing unit correctly. If the
message appears again, call your
sales or service representative.
Not Detected: Input Tray(s) The input tray is not set correctly. Set the input tray correctly. If the
message appears again, call your
sales or service representative.
Not Detected: Black Toner The toner cartridge is not set correct-
ly.
Set the toner cartridge correctly. If
the message appears again, call your
sales or service representative.
Messages Description Comments
To Next Page
Loading...
