Operating Instructions Administrator Reference 2
236
Exit pserver (In print server mode) Exits the print server because the
necessary print server settings have not been made.
Frametype="frame type name" The "frame type name" is configured to be used on Net-
Ware.
httpd start. An httpd has started.
inetd start. An inetd has started.
ipp disable. Printing with ipp is disabled.
ipp enable Printing with ipp is enabled.
LeaseTime=<lease time>(sec), RenewTime=<renew
time>(sec).
The resource lease time that was received from the DHCP
server is in seconds. The renewal time is also in seconds.
Login to fileserver "file server name" ("NDS|BIND-
ERY")
(In print server mode) Logged in to the file server with
NDS or BINDERY mode.
multid start. Data transmission service for multiprotocols has started.
nbstart start. (NetBEUI) The service for NetWare protocol stack setting has start-
ed.
NBT Registration Broadcast(<NetBIOS name>) Use a local broadcast to map <NetBIOS name> with the
IP address.
nptd start. A nbtd (NetBIOS over TCP/IP Daemon) has started.
(Available only in DHCP mode)
NetBEUI Computer Name="computer name" The NetBEUI Computer Name is defined as "computer
name".
nmsd start. (NetBEUI) A nmsd (Name Server Daemon) has started.
Message Description and Solutions
To Next Page
Loading...
