Operating Instructions Administrator Reference 2
257
❖
❖❖
❖ Required cable:
1394 interface cable (6 pin × 4 pin, 6 pin × 6 pin)
Important
❒ You cannot plug devices together so as to create loops.
❒ Do not use a cable more than 4.5 meters long.
❖
❖❖
❖ Connectable number of device in a bus:
Maximum 63
❖
❖❖
❖ Allowed cable hops in a bus:
Maximum 16
❖
❖❖
❖ Data Transmission:
400 Mbps (Maximum)
❖
❖❖
❖ Power supply:
Non power supply
Cable Power repeated (IEEE 1394a-2000 compliant)
Important
❒ In Windows 2000, the 1394 Interface Unit can only be used with Service Pack 1 or later. If the Serv-
ice Pack is not installed, the connectable number of device in a 1394 bus is only one, and the client
cannot access the 1394 Interface Unit without using an account has the Administrators permission.
❒ The optional 1394 Interface Unit is not supported by Windows 95/98/Me, Windows NT 4.0 and Mac-
intosh.
❒ In Windows 95/98/Me and Windows 2000, if the "plug and play" function starts, click [Cancel] in the
[New Hardware Found] or [Device Driver Wizard] dialog box.
❒ Do not plug or unplug the 1394 interface cable while installing the printer driver.
To Next Page
Loading...
