Lanier Copier System Edition - Page 551

Basic Copying
50
1
❖
❖❖
❖ Inch version
*1
Depending on the number of sheets to be stapled and whether sheets have
punched holes or not, the maximum tray capacity might be reduced.
❒ In the following cases, the copies will be delivered to the shift tray without
stapling:
• When the number of sheets for one set is over the stapler capacity.
• When memory reaches 0% during copying.
Reference
When using Staple with “1 Sided → 1 Sided”, “1 Sided → 2 Sided”, “2 Sided
→ 1 Sided”, “2 Sided → 1 Sided” in Combine mode or Double Copies, select
K original for L copy and L original for K copy.
When combining the Mixed Size function and Auto Paper Select, you can se-
lect and staple suitable paper even if originals of different sizes are placed.
Make sure to set beforehand the paper size you will use on the paper tray. The
following sizes can be stapled when using mixed sizes:
• A3 and A4
• B4 and B5
• 11" × 17"L and 8
1
/
2
" × 11"K
Paper size 11" × 17"L, 8
1
/
2
" × 14"K , 8
1
/
2
" × 11"KL
Stapler capacity • 8
1
/
2
" × 11"KL: 50 sheets (20 lb.)
• 11" × 17"L, 8
1
/
2
" × 14"K: 30 sheets (20 lb.)
• Mixed Size: 30 Sheets (20 lb.)
Shift Tray capacity
(8
1
/
2
" × 11"K)
*1
• Finisher Shift Tray 1: 500 sheets (20 lb.)
• Finisher Shift Tray 2: 1,500 sheets (20 lb.) (Large capacity mode:
2000 sheets (20 lb.))