Lanier Copier System Edition - Page 587

Operating Instructions Copy Reference <Advanced Features>
12
C
CC
C
Make sure that [
Size Magnificatn
] is high-
lighted.
D
DD
D
Enter the length of the original with the
number keys, and then press [
#
].
Note
❒ You can enter sizes within the following
ranges:
❒ To change the length entered, press
[Clear] or the {
{{
{Clear/Stop}
}}
} key, and then en-
ter the new length.
E
EE
E
Enter the length of the copy with the num-
ber keys, and then press [
#
].
Note
❒ You can enter sizes within the following
ranges:
❒ To change the length entered, press
[Clear] or the {
{{
{Clear/Stop}
}}
} key, and then en-
ter the new length.
❒ To change the length after pressing [#],
select [Original] or [Copy], and then enter
the desired length.
F
FF
F
Press [
OK
].
Metric
version
1 – 999mm (in 1mm steps)
Inch
version
0.1" – 99.9" (in 0.1" steps)
Metric
version
1 – 999mm (in 1mm steps)
Inch
version
0.1" – 99.9" (in 0.1" steps)