Lanier Copier System Edition - Page 650

Operating Instructions Copy Reference <Advanced Features>
75
Copies are too light. The image density is too light. Adjust the image density. ⇒ “Adjust-
ing Copy Image Density”, Basic Fea-
tures manual
The paper size is not appropriate. Use the recommended paper. ⇒
“Sizes and Weights Recommended
Originals”, Maintenance Guide 1
Copier System Edition
Note
❒ A light copy may result when
you use damp, rough grain or
coated paper.
Toner cartridge is almost empty. Add toner. ⇒ “Replacing the Toner
Cartridge”, Maintenance Guide 2
Copier System Edition
Parts of the image are not copied. The original is not placed correctly. Place originals correctly. ⇒ “Placing
Original”, Basic Features manual
An improper paper size is selected. Select the proper paper size.
Copies are blank. The original is not placed correctly. When using the exposure glass, face
the originals down. When using the
optional document feeder (ADF),
face them up. ⇒ “Placing Originals
on the Exposure Glass”, Basic Fea-
tures manual
Problem Cause Solution & Reference