Operating Instructions Copy Reference <Advanced Features>
107
❖
❖❖
❖ Change Initial Mode
You can select the standard mode or Program No. 10 as the mode effective when the machine is
turned on or modes are cleared.
Note
❒ Default: Standard
❖
❖❖
❖ Max. Copy Quantity
The maximum copy quantity can be set to 99.
Note
❒ Default: 99 Sheets
❖
❖❖
❖ Tone: Original remains
The beeper (key tone) sounds when you forgot to remove originals after copying.
Note
❒ Default: ON
❒ If the “Panel Tone” of the User Tools (System Settings) setting is “Off”, the beeper does not
sound irrespective of the “Tone: Original remains” setting. ⇒ “Panel Tone”, Administrator Refer-
ence 2 Copier System Edition
❖
❖❖
❖ Job End Call
You can choose whether or not the beeper sounds when copying is complete. If the “Panel Tone” of
the User Tools (System Settings) settings is “On”, the machine beeps to notify you that the machine
did not complete a job for reasons such as copying was interrupted, the paper tray ran out of paper
or a paper jam occurred.
Note
❒ Default: ON
To Next Page
Loading...
