Lanier Copier System Edition - Page 743

Operating Instructions Scanner Reference
27
❖
❖❖
❖ System settings
For information about the explanation of settings, see the respective manual.
*1
Settings for use as network TWAIN scanner
*2
Settings for use as network delivery scanner
*3
Settings for use as Document Server
*4
Do not change this setting. It must be left at the factory default value.
*5
Make sure that IP address is set.
Settings TWAIN
*1
Delivery
*2
Store
*3
Clock timer settings
⇒Administrator Reference 2
Scanner Auto Reset Timer ❍❍
Interface settings
[
Network
]
⇒Administrator Reference 1
IP Address ✩✩✩
Sub-net Mask ❍❍❍
Gateway Address ❍❍❍
Access Control ❍
Access Mask ❍
Network Boot ❍
Valid Protocol
*4
❍❍❍
Ethernet Speed ❍❍
File transfer settings
⇒Administrator Reference 1
Delivery Server IP Address
*5
✩
Resend Interval Setting ❍
Resend Frequency Setting ❍