EasyManua.ls Logo

Lanier Copier System Edition - Page 8

Default Icon
1270 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
iii
R CAUTION:
Note
To move the machine, contact your service representative.
The socket outlet on the back of the Scanner Unit is for the printer. Do not use
it for other equipment.
Power Connection: 120 V, 60 Hz, 12 A or more (10A: Printer, 2A: Copier Sys-
tem)
For safety information, see also the Setup Guide.
Protect the equipment from dampness or wet weather, such as rain, snow,
and so on.
You should take care that the power cable will not be damaged under the
equipment.
When you disconnect the power plug from the wall outlet, always pull the
plug (not the cable).
Do not allow paper clips, staples, or other small metallic objects to fall in-
side the equipment.
Do not eat or swallow toner.
Keep toner (used or unused) and toner cartridge out of reach of children.
For environmental reasons, do not dispose of the equipment or expended
supplies at a household waste collection point. Disposal should take place
at an authorized dealer or an appropriate collection site.
Our products are engineered to meet the highest standards of quality and
functionality. When purchasing expendable supplies, we recommend using
only those specified by an authorized dealer.
The inside of the machine becomes very hot. Do not touch the parts with a
label indicating a “hot surface”. Touching a “hot surface” could result in a
burn. (v: means "hot surface".)
To install this machine, contact your service representative. It can be dan-
gerous if electrical equipment is connected incorrectly.
The service representative will install options. Do not loosen or remove any
screws used in the rack.

Table of Contents

Related product manuals