Operating Instructions Maintenance Guide 2 Copier System Edition
11
Limitation
❒ Even if you correctly place originals in the document feeder or on the exposure glass, 3mm (0.1")
margins on all four sides of the original might not be copied.
❒ Make sure the original is placed correctly so that it is fed straight.
❒ When placing paper 433mm or larger in the document feeder (ADF), there are cases when the pa-
per will be jammed, creased, or not fed.
❒ The maximum value for the system length setting is 1260mm (49").
To Next Page
Loading...
