Operating Instructions Scanner Reference
107
Selected file is currently in use.
Cannot delete it.
A file that is being edited with DeskTopBinder V2
Lite/Professional or that is in a standby queue cannot be
deleted. Try the operation again after editing is terminat-
ed or standby was cancelled.
The selected files contain the file deleted.
Check the stored files status.
After sending the files, some files were deleted with
DeskTopBinder V2 Lite/Professional. Perform the selec-
tion process again.
Transmission has been cancelled due to containing the
deleted file.
Try again after checking the stored files status.
Before sending the files, some files were deleted with
DeskTopBinder V2 Lite/Professional. Perform the selec-
tion process again and resend the files.
Transmission has been failed.
Insufficient memory in server.
There is not enough free space on the hard disk of the de-
livery server. Free up the required amount.
Transmission to the server has been failed.
To confirm the result, see the Delivered Files Status.
While sending a file to the delivery server, a network er-
ror has occurred and the file could not be sent correctly.
Try the operation once more.
If the message is still shown, the network may be crowd-
ed and notify the network administrator.
If multiple files were sent, use the Delivery Files Status
screen to check for which file the problem occurred. ⇒
p.77 “Checking the Delivery Result”
Transmission to the server has been failed.
The data will be retransmitted later.
A network error has occurred and a file was not sent cor-
rectly to the delivery server. Wait until retry is performed
automatically after a preset interval. If the retry fails
again, notify the network administrator.
Message Causes and Solutions
To Next Page
Loading...
