Lanier Copier System Edition - Page 851

Getting Started
4
1
13. Main Power indicator
This indicator goes on when the main
power switch is turned on.
14. Operation Switch
Press this switch to turn the power on
(the On indicator lights up). To turn the
power off, press this switch again (the On
indicator goes off). ⇒ Chapter 10, “Pow-
er Failure Report” in the Advanced Fea-
tures manual
15.
{
{{
{Facsimile}
}}
} key
Press to switch to the Facsimile mode. ⇒
p.8 “Changing Modes”
• Lights up in yellow
Facsimile mode has been selected.
• Lights up in green
Facsimile mode has been printing.
• Lights up in red
Lights up whenever any facsimile er-
ror occurs. Press {
{{
{Facsimile}
}}
} to display
the error message and take the appro-
priate action. ⇒ p.75 “When the {Fac-
simile} Key is Lit in Red”
16. {
{{
{On Hook Dial}
}}
} key
Use to dial a number from the number
keys without having to lift the handset.
⇒ Chapter 4, “On Hook Dial” in the Ad-
vanced Features manual
17. {
{{
{Pause/Redial}
}}
} key
Pause:
Insert a pause when you are dialing or
storing a fax number. A pause cannot be
inserted as the first digit. ⇒ p.40 “Pause”
Redial:
Press to redial one of the last ten num-
bers. ⇒ Chapter 4, “Redial” in the Ad-
vanced Features manual
18. {
{{
{Tone}
}}
} key
Press to send tonal signals down a pulse
dialing line. ⇒ p.40 “Tone”
19. Number keys
Use to dial fax numbers or enter the num-
ber of copies.
20.
{
{{
{Clear/Stop}
}}
} key
Clear:
Deletes one character or digit.
Stop:
Interrupts the current operation (trans-
mission, scanning, copying or printing).
21.
{
{{
{Start}
}}
} key
Press to start all tasks.