Operating InstructionsFacsimile Reference (option) <Advanced Features>
27
Limitation
❒ For ID Polling Reception, program a Polling
ID in advance. ⇒ p.259 “Programming a Poll-
ing ID”
❒ Polling Reception requires that the other ma-
chine can perform Polling Transmission.
❒ To receive a message sent by any Default ID
Polling Transmission or ID Override Polling
Transmission, it is necessary to specify the
same Polling ID as the sender's.
❒ Usually, you can only receive documents with
a Polling ID from machines of the same make
that support the polling function. However, if
the other party's fax machine supports Polling
Transmissions and the “SEP” function, and
also has stored IDs. You can still perform Poll-
ing Reception. ⇒ p.78 “SEP Code”
❒ To receive a message sent by any Free Poll-
ing Transmission, it is not necessary to spec-
ify the same Polling ID as the sender's.
Note
❒ A Polling ID may be any four numbers (0 to 9)
and characters (A to F) except 0000 and
FFFF.
A
AA
A
Press [Transmission Mode].
The Transmission Mode menu appears.
B
BB
B
Select [Polling RX].
To Next Page
Loading...
