Operating InstructionsFacsimile Reference (option) <Advanced Features>
224
Use the Own Name or Own Fax Number to pro-
gram your receivers. If the receiver has the same
machine make, program an Own Name that is al-
ready programmed as a receiver. If the machine
is not the same make, use Own Fax Number. To
transmit with G4 line, program the information
about the destination with G4 lines. For conve-
nience you can specify a function for all pro-
grammed numbers. Use the Special Sender
registration function to custom set features for a
particular individual.
The following items can be programmed.
• Special Senders (Up to 30. A maximum of 50
when the optional Fax Function Upgrade Unit
is installed. A maximum of 20 characters for
each name when using G3, and a maximum of
24 characters for each name when using G4.)
• Full/Partial agreement
When you program Own Names and Facsim-
ile Names for multiple destinations, you can
program a common sequence of characters to
identify destinations using Partial agreement.
❖
❖❖
❖ Using a Full agreement
❖
❖❖
❖ Using a Partial agreement
Note
❒ You can program up to 30 wild cards (50
with the optional Fax Function Upgrade
unit).
❒ Ignore spaces when comparing identifica-
tions.
❒ You can use wild cards for the following
functions:
• ⇒ p.227 “Programming/Changing Spe-
cial Senders”
• ⇒ p.229 “Authorized RX”
• ⇒ p.229 “Forwarding”
Destination to be regis-
tered (Own Name)
Number of registered
identifications
NEW YORK BRANCH
HONG KONG
BRANCH
SYDNEY BRANCH
3
Destination to be regis-
tered (Own Name)
Number of registered
identifications
BRANCH 1
To Next Page
Loading...
