Operating InstructionsFacsimile Reference (option) <Advanced Features>
226
Note
❒ To use this feature, program your Special
Senders, and then select “ON” for “For-
warding” in “Reception Mode”. ⇒ p.198
“Reception Mode”
❒ If you specify “ON” in “Forwarding” and se-
lect “Same as basic settings”, the fax mes-
sage will be forwarded to the other ends
programmed in “Specify End Receiver”. ⇒
p.208 “Forwarding”
❒ If you do not program any Special Send-
ers, the machine transfers all incoming
documents to the other end that is speci-
fied in “Specify end Receiver”.
❖
❖❖
❖ Reception File Print Quantity
Use this feature to print the specified number
of copies of documents received from pro-
grammed senders (Special Senders). If you do
not program any Special Senders, the ma-
chine prints the Specified number of copies
for all received documents.
Limitation
❒ You cannot use multi-copy printing with
Polling Reception, Confidential Reception,
or Memory Lock.
Note
❒ You can specify 1 to 10 copies.
❖
❖❖
❖ Print 2 Sided
The optional duplex unit is required.
Use this feature to print on both sides of the
paper.
Limitation
❒ If you select bypass tray for the “Paper
Tray”, duplex printing is disabled.
❖
❖❖
❖ Memory Lock
Use this feature to store incoming documents
from programmed senders (Special Senders)
in memory without printing them. People who
do not know the Memory Lock ID cannot
print the documents, and therefore this feature
is useful for receiving confidential docu-
ments. If you do not program any senders, the
machine receives fax message from all send-
ers using Memory Lock reception.
Reference
❒ ⇒ p.260 “Programming a Memory Lock
ID”
Limitation
❒ If you program the same sender in Memo-
ry Lock and Forwarding, Forwarding is dis-
abled.
To Next Page
Loading...
