Operating Instructions Maintenance Guide 2 Copier System Edition
48
Exceeded max. pages. Collate is in-
complete.
The printer identified a collation page
overflow error.
Increase the RAM capacity.
Install the optional hard disk drive.
Exceeded max. stored pages in sam-
ple print and locked print.
The maximum number of stored files
has been exceeded during Sample
Print or Locked Print.
Reduce the number of pages to print.
Finisher is in use for another func-
tion. Please wait.
Optional 2 Tray Finisher is in use for
another function.
Wait until the job will be completed.
Following output tray is full.
Remove the paper.
The indicated output tray is full. Remove paper from the output tray.
Function Problem
Following unit is out of order.
Press [Cancel] to cancel functions.
Please call service.
There is a problem with the unit indi-
cated in the panel display.
Turn the main power switch off and
then on. If the message appears again,
contact your sales or service repre-
sentative.
Reference
Before turning the main pow-
er switch, see "Turning Off
the Main Power" in Adminis-
trator Reference 1.
Messages Description Solution
To Next Page
Loading...
