Operating Instructions Maintenance Guide 2 Copier System Edition
57
Staple unit is in use for another func-
tion. Please wait.
Staple unit is in use for another func-
tion.
Wait until the staple job will be com-
pleted.
Toner Cartridge Setting Error
Toner Cartridges are not set properly:
Black, Yellow, Magenta, Cyan
Open the part as shown and replace
the cartridge(s).
The indicated toner cartridge(s) is/are
not set correctly, or is not set.
Set the indicated toner cartridge(s)
correctly.
See "Replacing Consumables and
Maintenance Kit" in Maintenance
Guide 1.
Toner is almost empty.
Replace Toner Bottle.
The printer is almost out of indicated
toner.
Replace the indicated toner car-
tridge(s).
Transfer Unit Setting Error
Transfer Unit is not set properly.
Open the part as shown and set the
unit.
The transfer unit is not set correctly,
or is not set.
Set the Transfer Unit correctly.
See "Setting Up" in the Setup Guide.
Tray # has a problem. Select another
tray and press [Continue].
To cancel job, press [Reset].
Required:<xxx> <yyy>
There is a problem with the input pa-
per tray #.
#: tray number
<xxx>: paper size
<yyy>: paper type
Turn the main power switch off and
then on. If the message appears again,
contact your sales or service repre-
sentative.
Reference
Before turning the main pow-
er switch, see "Turning Off
the Main Power" in Adminis-
trator Reference 1.
Messages Description Solution
To Next Page
Loading...
