Operating Instructions Maintenance Guide 2 Copier System Edition
63
Images are cut off, or excess pages are
printed.
You might be printing on paper smaller than the paper size selected in the
application. Use paper the same size as that selected in the application. If
you cannot load paper of the correct size, use the reduction function to re-
duce the image, and then print.
See the printer driver's Help file.
It takes too much time to complete the
print job.
Photographs and other data intensive pages take a long time for the printer
to process, so simply wait when printing such data.
Changing the following settings may help to speed up printing.
• PostScript
Select "Standard" for Gradation under the [Print Quality] tab in the
printer driver's dialog box.
Select "Post Script(optimize for speed)" for PostScript output format
under the [PostScript] tab in the printer driver's dialog box.
• RPCS
Select "1200×600 dpi" or "600×600 dpi" for Resolution under the [Im-
age Adjustments] tab in the Change User Settings dialog box in the
printer dialog box.
Select "Speed" for Print priority under [Print Quality] tab in the printer
driver's dialog box.
For more information, see the printer driver's Help file.
The data is so large or complex that it takes time to process it. If the Data
In indicator is blinking, data processing is being performed. Just wait until
it resumes.
If "Please wait" appears on the panel display, the printer is now warming
up. Wait for a while.
Status Possible Causes, Descriptions, and Solutions
To Next Page
Loading...
