Operating Instructions Maintenance Guide 2 Copier System Edition
65
Solid areas, lines or text are shiny or
glossy when created as a mixture of cy-
an, magenta, yellow.
• PCL 5c/PostScript
Select "K(Black)" for Gray Reproduction in the printer driver's [Ad-
vanced...] dialog box under the [Print Quality] tab.
• RPCS
Select "K(Black)" for Gray Reproduction under the [Image Adjust-
ments] tab in the printer driver's [Change User Settings] dialog box.
Solid lines are printed as broken lines. • PCL 5c/PostScript
Change the [Dithering] setting in the Advanced dialog box under the
printer driver's [Print Quality] tab.
• RPCS
Change the [Dithering] setting under the [Image Adjustments] tab in the
[Change User Settings] dialog box, under the [Print Quality] tab in the
printer driver's dialog box.
For more information, see the printer driver's Help file.
Some parts of the print image are not
clear.
Make the image density darker.
To adjust the image density, press the {
{{
{User Tools/Counter}
}}
} key, and then
press [Printer Features]. Select Image Density from the "Maintenance"
menu.
The color of the printout is different
from the color on the computer's dis-
play.
The toner based color settings with the printer driver causes a drastic
change in printout color.
Changing the color settings with the printer driver causes a drastic change
in printout color.
See the printer driver's Help file.
The image is printed in the wrong orien-
tation.
The feed direction you selected and the feed direction selected in Option
Setup of the printer driver might not be the same. Make the proper settings.
The control panel error message stays
on after removing the misfed paper.
Open the front cover of the printer, and then close it.
Status Possible Causes, Descriptions, and Solutions
To Next Page
Loading...
