Lanier Copier System Edition - Page 277

Operating Instructions Administrator Reference 2
48
D In the [Remote Printer No.] box, type the printer number.
Important
❒ Use the same printer number as that to be created in the printer server.
E Click [OK] to close the property sheet.
F After a confirmation dialog box appears, click [OK].
G
GG
G
On the [NIB] menu, click [Exit] to exit the NIB Setup Tool.
H
HH
H
Type "PCONSOLE" from the command prompt.
F:> PCONSOLE
I
II
I
Create a print queue as follows.
Note
❒ If you use a currently defined print queue, go to step
J
.
A From the [Available Options] menu, select [Print Queue Information] and press {
{{
{ENTER}
}}
}.
B Press {
{{
{INSERT}
}}
} and type a print queue name.
C Press {
{{
{ESC}
}}
} to return to the [Available Options] menu.
J
JJ
J
Create a printer as follows.
A From the [Available Options] menu, select [Print Server Information] and press {
{{
{ENTER}
}}
}.
B To create a new print server, press {
{{
{INSERT}
}}
} and type a print server name.
If you use an currently defined print server, select one of the print servers shown in the [Print
Server] list.
Important
❒ Use the same name as that specified in the NIB Setup Tool. (Step
F
).