Operating Instructions Administrator Reference 2
105
Note
❒ The output trays set on the printer driver have priority over the output tray specified above.
❒ For details about output trays, refer to the illustration in p.103 “Output: Copier”.
❒ If 2 Tray Finisher is installed and the Staple function is selected, the machine outputs the paper
from Finisher Tray 2 regardless of the output setting.
Tray Paper Settings
1
/
3
❖
❖❖
❖ Paper Tray Priority: Copier (for Copy/Document Server function only)
You can specify the output tray for delivery.
• Tray 1
• Tray 2
• Tray 3
• Tray 4
Note
❒ Default: Tray 1
❒ When optional paper feed units are installed, Tray 3 and Tray 4 are displayed.
❒ When the optional 2000-sheet Large Capacity Tray is installed, Tray 3 is displayed.
❖
❖❖
❖ Paper Tray Priority: Printer (for printer function only)
You can specify the output tray for delivery.
• Tray 1
• Tray 2
• Tray 3
• Tray 4
To Next Page
Loading...
