Lanier Copier System Edition - Page 691

Operating Instructions Copy Reference <Advanced Features>
116
❖
❖❖
❖ Back Margin: Top/Bottom
You can specify top and bottom margins on the back side of copies in Margin Adjust mode.
Note
❒ Default:
• Metric version: T/B 0mm
• Inch version: T/B 0.0"
❖
❖❖
❖ 1 sided→
→→
→2 sided Auto Margin:T to T
The optional duplex unit and hard disk unit (40 GB) are required.
In 1 sided → 2 sided Duplex mode, you can specify whether to automatically set the margins on the
back side.
The margin is set to the same value of “Back Margin: Left/Right”.
Note
❒ Default:
• Metric version: Right 5mm
• Inch version: Right 0.2"
❖
❖❖
❖ 1 Sided→
→→
→2 Sided Auto Margin: TtoB
The optional duplex unit and hard disk unit (40 GB) are required.
In 1 sided → 2 sided Duplex mode, you can specify whether to automatically set the margins on the
back side. The value set for “Back Margin: Top/Bottom” is used.
Note
❒ Default:
• Metric version: T/B 0mm
• Inch version: T/B 0.0"