Lanier Copier System Edition - Page 692

Operating Instructions Copy Reference <Advanced Features>
117
❖
❖❖
❖ Erase Border Width
The default setting of the width of the erased margins in Erase Border mode can be changed as fol-
lows:
• Metric version: 2 – 99mm in 1mm steps
• Inch version: 0.1" – 3.9" in 0.1" steps
Note
❒ Default:
• Metric version: 10mm
• Inch version: 0.4"
❖
❖❖
❖ Erase Original Shadow in Combine
In Combine Copy mode, you can specify whether to erase a 3mm, 0.1" bounding margin around all
four edges of each original.
Note
❒ Default: Yes
❖
❖❖
❖ Erase Center Width
The default setting of the width of the erased margins in Erase Center mode can be changed as fol-
lows:
• Metric version: 2 – 99mm in 1mm steps
• Inch version: 0.1" – 3.9" in 0.1" steps
Note
❒ Default:
• Metric version: 10mm
• Inch version: 0.4"