Related SP to Fusing Offsets
SP Name SP No. Value
Print Target Temp.:Plain1:FC:Center SP1-105-001
As initial values + 10 °C are the
upper limits, change values to
improve offsets.
Print Target Temp.:Plain1:BW:Center SP1-105-003
Print Target Temp.:Plain2:FC:Center SP1-105-005
Print Target Temp.:Plain2:BW:Center SP1-105-007
Print Target Temp.: Thin:FC:Center SP1-105-009
Print Target Temp.: Thin:BW:Center SP1-105-011
Print Target Temp.: M-thick:FC:Center SP1-105-013
Print Target Temp.: M-thick:BW:Center SP1-105-015
Other Troubleshooting
1075
To Next Page
Loading...
