4. Close the pressure plate sheet [A].
5. Close the SPDF.
• If the protective sheet remains in the SPDF, a paper jam will be detected.
Removal of PCDU Seals
• Automatic initial adjustment will be done even if the seal was not removed correctly. But toner from
a PCDU that still has the seal will not be able to reach the ITB, and will not be transferred to
printouts and copies.
• If this happens, remove the PCDU seal and do SP2-111-004 (Forced Line Position Adj. Mode d).
• White stripes may appear in the printed images for the first 20k pages printing continuously in a
low humid environment, due to the deviation of toner density adjustment. Except for that, the
machine operates normally.
• SP descriptions
• SP2-111-004 (Forced Line Position Adj. Mode d)
Executes the fine line position adjustment and rough line position adjustment.
1. Open the front cover.
2. Installation
68
To Next Page
Loading...
