2. Change the values of bit switches with the following SP numbers.
Desired tone (color gamut) SP to change Value to select
2009 Spring model or those
before it
SP1-001-002
00000001
[01H]
2009 Autumn to 2011 Spring
model
00010000
[10H]
2011 Autumn model or later
00000000
[00H]
Fuji Xerox product SP1-001-001
10000000
[80H]
3. Turn the machine’s power off and then back on.
The specified setting is applied.
Patterns and Tendency of the Tone for Each Profile
Model with the desired
tone
Image (Photo) Graphic (Chart) Text
2009 Spring model or
earlier
Color A Color A Color A
2009 Autumn to 2011
Spring model
Color B Color B Color B
2011 Autumn model or
later
Color B Color C Color C
Fuji Xerox product Color D Color D Color D
Color A
Standard profile for MP C2030/C2050/C2030/C2530/C2800/C3300/C4000/C5000
and their preceding models
Color B
Standard profile for MP C2051/C2551/C3001/C3501/C4501/C5501.
Compared to Color A, following changes have been applied:
• Yellow tint of the skin color is reduced.
Image Adjustment
649
RTB 28
This table was
modified
To Next Page
Loading...
