Ricoh MP C2504 - Before Replacing the TM;ID Sensor; Fusing Entrance Sensor; TM;ID Sensor

Fusing Entrance Sensor
1. Open the right door.
2. Fusing entrance sensor unit [A]
3. Fusing entrance sensor [A]
TM/ID Sensor
Before Replacing the TM/ID sensor
Each sensor assembly has a list of characteristic values attached to it. Before you replace the TM/ID
sensor, you must do the following procedure, or process control/MUSIC will not be done correctly after
power is switched on (it will use the values for the old sensor).
4. Replacement and Adjustment
498