12. Change the administrator 1 login password.
13. Input the password, and then press [OK].
14. Confirm the password, and then press [OK].
15. After the toner initialization is completed, the machine beeps, and the following message
is displayed. Turn the machine OFF/ON.
• Even though the control panel display has gone off, the machine may still be on. So when
turning the power off and back on, be sure to check that the main power indicator has gone
off before turning the power on again.
For Machines with Preinstalled ARDF: Fax Stamp Installation (Option)
This procedure is required for the machine which the fax function is installed as standard.
2. Installation
76
To Next Page
Loading...
