Ricoh MP C2504 User Manual

SP No. Function Default
SP5-045-001
Counter method
Specifies if the counting method used in meter charge mode
is based on developments, prints, or coverage.
"1": Prints
SP5-104-001 (SSP)
A3/DLT double count
Specifies whether the counter is doubled for A3/DLT paper.
"0":Single
counting
SP5-812-001 and
-002
Service Tel:
Telephone / Facsimile
-001: shows or sets the telephone number of the service representative.
-002: shows or sets the fax number of the service station. The number is
printed on the counter list when the "Meter Click Charge" is enabled. User
can send a fax message with the counter list.
Counter Display Method
There are 3 types (Developments, Prints and Coverage). Display mode can be set by SP5-045-001
(Accounting counter: Counter Method).
Value Mode Descriptions
0 Development Count
YMC Development Counter
Bk Development Counter
1
Print Count
(Default)
Color Copy Counter
B&W Copy Counter
Color Print Counter
B&W Print Counter
Color Total Counter
B&W Total Counter
2 Coverage Count
Color Total Counter
B&W Total Counter
Color Coverage Counter 1
Color Coverage Counter 2
Color Coverage Counter 3
2. Installation
90

Ricoh MP C2504 Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Print Resolution	1200 x 1200 dpi
Scan Type	Flatbed, ADF
Max Scan Resolution	600 x 600 dpi
Copy Resolution	600 x 600 dpi
Max Paper Size	A3
Duplex Printing	Yes
Memory (RAM)	2 GB
Print Speed	25 ppm (A4)
Copy Speed	25 cpm (A4)
Fax Resolution	200 x 200 dpi
Paper Capacity	1200 sheets
Connectivity	USB, Ethernet, Wi-Fi
Dimensions	587 x 685 x 913 mm
Control Panel	9-inch Smart Operation Panel