Ricoh MP C2504 - Finisher Part Specifications; Stapler Unit Specifications

Finisher part specifications
Item Specification
Type Case system
Shift tray Yes
No. of sheets which can be
accommodated
A4, 8
1
/
2
×11 or smaller: 500 / height: lower than 57mm
B4, 8
1
/
2
×14 or larger: 250 / height: lower than 28.5mm
Paper thicknesses which can be
handled
52g/m
2
-300g/m
2
Up/down shift function No
Left/right shift function Yes
Stapling function Yes
Punching function Option
Remainder detection No
Full-load detection Yes
Paper detection No
Power consumption Less than 47W (24V DC /2A)
Power source
24V DC (supplied from main printer), 5V SC (generated by FIN
board), SELV (super-low voltage secondary power supply)
Stapler unit specifications
Item Specification
No. of sheets which can be
stitched
A3 SEF, B4 SEF, 11"×17" SEF, 8
1
/
2
”×14” SEF, 8
1
/
2
”×13” SEF,
8
1
/
4
”×14” SEF, 8
1
/
4
”×13” SEF: 30
A4 LEF / SEF, B5 LEF / SEF, 8
1
/
2
"×11" LEF / SEF,
7
1
/
4
"×10
1
/
2
" LEF / SEF: 50
When loading mixed widths: 30
1. Specifications
50