Size
Knob
4 3 2 1
B5 landscape(Exe landscape) 0 0 1 0
A5 landscape 0 1 0 1
* "0" is switch ON (PUSH), "1" is switch OFF.
* The figures in parentheses are automatic paper size switch can be switched over in SP mode (for SP
settings, see "SP mode (paper supply transport)": SP5-181-002 to 006).
* SRA3=320×450mm(12.6"×17.7")
* Exe LEF=10.5"×7.25"
* If a pattern other than the above is detected, a blank is displayed on the control panel.
Remaining Paper Detection
When the lift motor rotates, the remaining paper sensors 1, 2 [A] built into the motor switch ON
(unblocked) or OFF (blocked). Paper remaining in the paper feed tray is detected by the combination of
ON/OFF for the two sensors.
7. Detailed Descriptions
1166
To Next Page
Loading...
