Ricoh MP C2504 - SP1-XXX (Fusing)

1-009-015 Paper LCT: Thin *ENG [0 to 1 / 1 / 1/step]
1-009-016 Paper LCT: Plain *ENG [0 to 1 / 1 / 1/step]
1-009-017 Paper LCT: Thick *ENG [0 to 1 / 1 / 1/step]
1101 [Operation Setting]
1-009-018 Pre-rotation Start Temp. *ENG [0 to 3 / 1 / 1/step]
SP1-XXX (Fusing)
1101 [Reload Permit Setting]
1-101-001 Pre-rotation Start Temp. *ENG [0 to 200 / 0 / 1deg/step]
1-101-002 Reload Target Temp.:Center *ENG [0 to 190 / 114 / 1deg/step]
1-101-003 Reload Target Temp.:Press *ENG [0 to 200 / 120 / 1deg/step]
1-101-004 Temp.:Delta:Cold:Center *ENG [4 to 200 / * / 1deg/step]
*NA: 27, EU: 31, Asia: 31, CHN: 31,
TWN: 27, KOR: 31
1-101-005 Temp.:Delta:Cold:End *ENG [4 to 200 / * / 1deg/step]
*NA: 27, EU: 31, Asia: 31, CHN: 31,
TWN 27, KOR: 31
1-101-006 Temp.:Delta:Cold:Press *ENG [4 to 200 / 110 / 1deg/step]
1-101-007 Forced Reload Time:Cold *ENG [0 to 100 / 15 / 0.1sec/step]
1-101-008 Temp.:Delta:Low Power:Center *ENG [4 to 200 / 6 / 1deg/step]
1-101-009 Temp.:Delta:Low Power:End *ENG [4 to 200 / 6 / 1deg/step]
1-101-010 Temp.:Delta:Low Power:Press *ENG [4 to 200 / 110 / 1deg/step]
1-101-011 Forced Reload Time:Low Power *ENG [0 to 100 / 15 / 0.1sec/step]
1-101-012 Temp.:Delta:Hot:Center *ENG [4 to 200 / 6 / 1deg/step]
1-101-013 Temp.:Delta:Hot:End *ENG [4 to 200 / 6 / 1deg/step]
1-101-014 Temp.:Delta:Hot:Press *ENG [4 to 200 / 110 / 1deg/step]
3. Engine SP Mode Tables
74