Ricoh MP C2504 - Printer Service Menu; SP1-XXX (Service Mode)

Printer Service Menu
SP1-XXX (Service Mode)
1001 [Bit Switch]
1-001-001 Bit Switch 1 0 1
bit 0 DFU - -
bit 1 Responding with the hostname as the
sysName
Model
name
(PnP name)
Hostname
This BitSwitch can change the value of the sysName.
0 (default): Model name (PnP name) such as "MP C401SP"
1: Host name
bit 2 DFU - -
bit 3 No I/O Timeout Disabled Enabled
Enables/Disables MFP I/O Timeouts. If enabled, the MFP I/O Timeout
setting will have no affect. I/O Timeouts will never occur.
bit 4 SD Card Save Mode Disabled Enabled
If this bit switch is enabled, print jobs will be saved to the GW SD slot and not
output to paper.
bit 5 [PS and PDF] Paper size error margin ±5pt ±10pt
When a PS job is printed by using a custom paper size, the job might not be
printed because of a paper size mismatch caused by a calculation error. By
default, the error margin for matching to a paper size is ±5 points. By
enabling this BitSwitch, the error margin for matching to a paper size can be
extended to ±10 points.
4. Controller SP Mode Tables
652