Booklet Finisher SR3220 (D3B9)
• To attach this optional unit, the following optional units are required.
- Bridge Unit BU3070 (D685)
- Paper Feed Unit PB3220/PB3210 (D787)
Accessory Check
No. Description Q’ty Remarks
1 Shift Tray 1
2 Booklet Tray 1
3 Joint Bracket 1
4 Relay Guide Plate 1
5 Cushion 1
6 Tapping screws - M3 × 6 4
7 Tapping screw - M4 × 8 1
8 Screws - M4 × 12 4
9 Stabilizer 1
This part must be attached to the finisher
just after it is taken out of the shipping
box.
10 Ground Plate 1
11 Proof Support Tray 1
- Installation Procedure: Arm 1
Booklet Finisher SR3220 (D3B9)
195
To Next Page
Loading...
