7. After completing the update and starting the Java VM, "Update SDK / J done SUCCESS"
appear in the banner message of the touch panel display. After turning off the power,
remove the SD card from the slot.
When you fail to update, "Update SDK/J done FAIL" is displayed. You can confirm the cause of
the error message below.
8. Turn ON the main power.
9. Reconfigure the Heap size. ([Extended Feature Settings]-[Administrator Tools]-[Heap/
Stack Size Settings]).
See the manual for the ESA application to know what value to set for the heap size.
10. Return to the previous setting for the boot priority application.
List of Error Messages
Update results are output as a text file on the SD card called "sdkjversionup.log" in the "\sdk \update"
folder.
Result File contents Description of the output
Success
script file = /mnt/sd0/sdk/update/bootscript
2012/08/22 17:57:47 start
2012/08/22 17:59:47 end SUCCESS
Boot script path
Boot scripts processing start time
End time boot script processing, the
results
Failure
script file = /mnt/sd0/sdk/update/bootscript
2012/08/22 17:57:47 start
XXXX Error
2012/08/22 17:57:57 end FAIL
Boot script path
Boot scripts processing start time
Error message (Possibly multiple)
End time boot script processing, the
results
Error Message Cause Remedy
PIECEMARK
Error,machine=XXXXX
Applied the wrong updating tool
(Using the updating tool of a
different model)
Use the correct updating tool
for this model.
pasePut() - error : The file of the
copy origin is not found
Put Error!
Inadequacy with the SD card for
updating
(Files are missing in the updating
tool)
Re-create the SD card for
updating.
5. System Maintenance
714
To Next Page
Loading...
Need help?
General
