EasyManuals Logo

Ricoh MP C2504 User Manual

Ricoh MP C2504
1923 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #734 background imageLoading...
Page #734 background image
Error Code Description
-3 The SD card is locked. In this case, unlock the SD card, as shown below.
[A]: Unlocked, [B]: Locked
8. Wait for the information and/or logs to be copied to the SD card.
9. After a message stating that the process has completed appears on the operation panel,
confirm that the LED light next to the SD card slot is not flashing and then remove the SD
card.
10. Make sure that the SD card access LED is off, then remove the SD card.
The process of obtaining logs fails in the following cases:
- When the size of the logs to obtain exceeds the amount of space available on the SD card.
- When the SD card is removed while the logs are being copied to it.
- When the SD card is not formatted.
If ‘failed’ appears on the touch panel display, turn the power off, and then recover from step
1 again.
Retrieving the Device Logs via Web Image Monitor
The device logs can be retrieved via the Web Image Monitor.
Capturing the Device Logs
725

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ricoh MP C2504 and is the answer not in the manual?

Ricoh MP C2504 Specifications

General IconGeneral
Print TechnologyLaser
FunctionsPrint, Copy, Scan, Fax
Print Resolution1200 x 1200 dpi
Scan TypeFlatbed, ADF
Max Scan Resolution600 x 600 dpi
Copy Resolution600 x 600 dpi
Max Paper SizeA3
Duplex PrintingYes
Memory (RAM)2 GB
Print Speed25 ppm (A4)
Copy Speed25 cpm (A4)
Fax Resolution200 x 200 dpi
Paper Capacity1200 sheets
ConnectivityUSB, Ethernet, Wi-Fi
Dimensions587 x 685 x 913 mm
Control Panel9-inch Smart Operation Panel

Related product manuals