1. Access the following URL and logon as an administrator:
http://[IP address or host name]/web/entry/df/websys/direct/getSysInfo.cgi
2. Specify the date that the problem occurred and the number of days to download the logs.
If the fax destinations need to be included in the fax information, set "On" as "Obtain Fax
Destination(s) Information". Then click "Download".
• "3" is set by default for "Number of days, including date fault occurred, to obtain". However
"2", which is the minimum needed for investigating the problems, is recommended for
reducing the downloading time.
• "Obtain Fax Destination(s) Information" is set to "Off" by default.
5. System Maintenance
726
To Next Page
Loading...
